THEORETICAL BASIS OF PLUG AGGREGATION AND THEIR IMPACT ON WORK EFFICIENCY
DOI:
https://doi.org/10.47390/ts-v4i4y2026N11Keywords:
plow, aggregation, tractor, soil tillage, draft resistance, working depth, motion stability, energy efficiency, agricultural machinery, technological process, labor productivity, structural parameters, soil resistance, aggregate efficiency.Abstract
This article presents the theoretical foundations of plow aggregation. Efficient aggregation of plows with tractors in agricultural operations plays an important role in improving soil tillage quality, reducing fuel consumption, and increasing labor productivity. The study analyzes the structural and technological parameters of plow units, draft resistance, working depth, and factors affecting motion stability. In addition, optimal options for plow aggregation under various operating conditions are considered. The obtained results are of practical significance for improving agricultural machinery and enhancing its efficiency.
References
1. Лобачевский Я.П., Панов А.И., Панов И.М. Перспективные направления совершенствования лемешно-отвальных плугов // Тракторы и сельскохозяйственные машины, 2000, №5. – С. 8-12.
2. Солодовников В.В., Плотников В.Н., Яковлев А.В. Основы теории и элементов систем автоматического регулирования. – Москва: Машиностроение, 1985. – 536 с.
3. Касымов А.Ш., Золотарев В.В. Установившееся прямолинейное движение пахотного агрегата с задней и передней навеской // Тракторы и сельскохозяйственные машины, 1988, №1. – С. 34-37.
4. Юшин О. Перспективы развития тракторной энергетики // Механизация сельского хозяйства, 1979, №7. – С. 21-27. (на украинском языке)
5. Taylor J.H. Benefits of permanent traffic lanes in a controlled traffic crop production system. Soil Till Res. 1983. №3. Р. 385-395.
6. Ravshanov, K., Fayzullaev, K., Ismoilov, I., Irgashev, D., Mamatov, S., & Mardonov, S. (2020, July). The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012138). IOP Publishing.
7. Fayzullaev K. et al. Study on mechanisms of tillage for melon cultivation under the film //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 304. – С. 03012.
8. Fayzullayev K. et al. Raking plates of the combination machine's subsoiler //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 264. – С. 04039.
9. Irgashev D. et al. Placement of working bodies on the frame of the tool plow-ripper //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 390. – С. 01036.
10. Irgashev D., Mamadiyorov O., Xidirov M. Technical analysis of the disk working bodies that work the soil and them working between the garden row //Science and innovation. – 2022. – Т. 1. – №. A5. – С. 150-155.
11. Irgashev D. B. Basing the Constructional Parameters of the Plug-Softener that Works Between the Garden Rows. – 2024.
12. Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
13. Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
14. Irgashev Dilmurod Begmurodovich I. D. B. Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow //– 2025. – Т. 7. – №. 3. – С. 168-175.
This work is licensed under a 